The Part You Can't Buy, Made
Discontinued, rare, broken, or one-of-a-kind - if the part for your bike, ATV, UTV, jet ski, car, boat, or plane doesn't exist anymore, our Tampa team can scan, design, and print it. Powersports is where reverse engineering and 3D printing really earn their keep.
Parts for the things that move
Bikes, ATVs, UTVs, jet skis, cars, boats, planes - if it has a part that's hard to find or doesn't exist, that's our favorite kind of problem to solve right here in Tampa.
- Discontinued and out-of-production replacement parts
- Custom brackets, housings, mounts, and fitments
- Custom lighting mounts, speaker pods, and accessory mounts
- One-off pieces for builds and restorations
- Reverse-engineered parts from a sample you already have
- Durable polymer parts chosen for the job
- Prototypes to test fit and function before you commit
We bring the same scan-to-print approach to manufacturing, automotive crash scanning, and other industries where hard-to-find parts are the norm.
How it comes together
Even with no drawings and only a worn original to work from, we can get you a part.
- Scan or measureWe capture the original part - or what's left of it - with accurate 3D scanning.
- Design or rebuildWe turn that into a clean model, fixing wear or improving the design where it helps. See our reverse engineering and CAD work.
- Check itWe check the model back against the original scan data before anything ships.
- Print itWe 3D print the part in a material suited to how it'll be used.
- Test and refineCheck the fit, adjust if needed, and you're back on the road, trail, water, or runway.
We match the scanner to the part
You do not have to pick. Tell us what the part is and we choose the scanner.
- Small parts with fine detail: the Artec Spider, down to 0.05 mm. Good for threads, fillets, and tight tolerances.
- Medium-sized parts: the Artec Eva, up to 0.1 mm accuracy. Our workhorse for most reverse engineering work.
- Parts that can't come to us: the Artec Leo is portable and battery-powered. If the part is bolted to a machine or too large to ship, we bring the scanner.
- No marker dots, no contact: our scanners do not need marker dots on most parts, and they do not touch the part.
- Hidden inside shapes: an optical scanner can't see fully enclosed cavities. Tell us up front. Options may include CT scanning or taking the part apart.
Very shiny, dark, or see-through surfaces are harder for any optical scanner. Tell us the material and we plan for it before the scan. More on our 3D scanning page.
The right file for what you do next
A scan gives you a mesh. Whether you also need a STEP file depends on what happens next.
- Mesh (STL or OBJ): a surface made of triangles. Good for 3D printing, visualization, and printed jigs and fixtures. You can't edit it as real features.
- STEP or IGES: CAD geometry with real, editable surfaces. Right when you need to change the design, machine it, or hand it to an engineer.
- Checked against the original: for reverse engineering we can add a color-mapped deviation report that shows where the model and the real part differ.
- Not sure? Tell us the end use and we will recommend the format, or deliver both.
Pick the material by how the part is used
Tell us the load, heat, finish, and environment. We recommend the process and material to match.
- FDM for strong, cost-effective functional parts and jigs.
- SLA resin for fine detail and smooth, crisp surfaces.
- MJF and SLS for durable nylon parts with no support marks.
- Materials run from everyday PLA to engineering-grade polymers. We have materials for parts that see heat, sun, fuel, or water.
- Make it better than the original: once the part is digital, we can fix weak points or change fitments.
- Metal? We specialize in polymer and composite printing. Ask us and we will talk through the options for metal.
We can also sand, paint, dye, and assemble parts so they arrive looking the way you need. The full process list is on our 3D printing page.
One part, a small run, or a big part
We have no part minimums. One replacement part is as welcome as a full run.
- One-off: a single replacement part or a piece for one build.
- Prototypes: one-off to about 20 parts, to test fit before you commit. See rapid prototyping.
- Short runs: often 1,000 parts or fewer, with no tooling cost.
- Production: up to a few thousand, depending on part geometry. See manufacturing.
- Large parts: we print them in multiple pieces. The Hotel Flor awning tops, 75 feet in total, were all done in pieces.
We team up with builders and creators
We collaborated with creator SamCracc on a car build. Watch it come together below, or on YouTube.
A car build with SamCracc
What to send for a quote
Send what you have. A photo and a plain description is a fine start.
- The part itself: ship it to us, or if you're near Tampa a local drop-off by arrangement works too. Talk to us first, because there may be other options depending on the part.
- Files: the quote form takes STL, STEP, STP, OBJ, 3MF, IGES, IGS, DXF, PDF, images, and ZIP, RAR, or 7z archives.
- Limits: up to 5 files, 25 MB total, on the quote form.
- No file and no part? Photos, a sketch, or a description can be enough for us to model it first.
- How it will be used: load, heat, finish, and environment. It helps us pick the material.
Quoted to the part
Every part is different, so we quote each one.
Print cost depends on the material, size, finishing, and quantity. Work starts at $10, and a quote is free with no obligation.
If the part needs to be designed or rebuilt in CAD first, CAD design often runs $150 to $250 an hour, but we prefer to custom quote. Scan cost depends on the size of the part, the detail you need, and whether we travel to you. A short, free consultation is available if you want to talk it through first.
Frequently asked
I only have the broken original. Can you still help?
Usually, yes. A worn or partial part is often enough for us to scan, rebuild, and reproduce.
Will a printed part be strong enough?
It depends on the part and the load, which is exactly why we choose the material and process to match. Tell us how it'll be used and we'll spec it right.
Can you make just one?
Absolutely. One-off parts and small runs are a big part of what we do. We have no part minimums.
Do you work with metal parts or just plastic?
We specialize in polymer and composite 3D printing, which covers a huge range of powersports applications. For parts that need metal, we can advise on the best path forward.
How long does a replacement part take?
Days to weeks, depending on the size of the part. We give you a timeline with your quote.
Can you make safety-critical parts?
Generally, no. A part where a failure puts someone at risk would need very serious materials, and that is usually more than a one-off part can afford. You can still ask us about your part.
Do I need to ship you the part?
Often that's the easiest path. If you're near Tampa we can arrange a local drop-off instead. If the part is bolted to a machine or too large to ship, our portable scanner can come to it. Talk to us first.
Can you make the part better than the original?
Yes. Once the part is digital, we can fix weak points, change fitments, or prepare it for manufacturing.
What file do I get back?
A mesh (STL or OBJ) for printing, or a STEP or IGES file when you need to edit the part in CAD. Tell us the end use and we will recommend the format, or deliver both.
How much does a part cost?
It depends on the material, size, finishing, and quantity, and on whether the part needs scanning or CAD first. Work starts at $10, and a quote is free with no obligation.
Let's make your part
Bring the build. We'll make what you can't buy.
Start a Build or call (813) 803-4973