3D Musketeers // Kinematics Series
How 3D printers actually move
Five motion systems, one animated schematic each, all tracing the 3D Musketeers mark as their toolpath. The chips beside every machine light up in real time to show which motors are working. Press Focus on any machine for a full-screen view.
Cartesian
bedslinger / i3 styleThe simplest layout: one motor per axis. The hotend rides left-right on the X gantry, the whole bed slides forward and back for Y, and two synced screws lift the gantry for each new Z layer.
- Examples
- Ender 3, Prusa MK4, Anycubic Kobra
- Strength
- Cheap, simple, easy to fix and mod
- Limit
- Throwing the bed (and print) around caps speed
CoreXY
top view / crossed beltsTwo stationary motors share the work through one long belt path each. Spin A and B the same way and the head moves in X; spin them opposite ways and it moves in Y. On 45 degree strokes only one motor turns. The bed only moves down, one layer at a time.
- Examples
- Bambu X1/P1, Voron 2.4, Creality K1
- Strength
- Light toolhead, huge accelerations
- Limit
- Long belts need careful tension and squaring
Delta
three towers / parallel armsThree carriages slide only up and down their towers. Fixed-length arms connect them to the effector, so every X/Y/Z position is a unique combination of the three carriage heights. All three motors work together for almost every move.
- Examples
- FLSUN V400, Anycubic Predator
- Strength
- Very light effector, fast, tall build volume
- Limit
- Round bed, math-heavy calibration
Belt
45 deg gantry / infinite ZThe gantry is tilted 45 degrees over a conveyor bed. Layers are printed on that slanted plane while the belt slowly carries the part away, so there is no back wall to hit: parts can be endless, or print one after another forever.
- Examples
- Creality CR-30, iFactory One
- Strength
- Unlimited length, hands-free batch printing
- Limit
- 45 deg slicing, belt adhesion is fussy
SCARA
top view / robot armNo linear rails at all: a shoulder and an elbow joint swing a two-link arm over the bed, like a robot arm laying down plastic. XY comes from the two joint angles (inverse kinematics); Z is a screw in the column.
- Examples
- RepRap Morgan, DIY SCARA builds
- Strength
- Compact, few rails, big reach per footprint
- Limit
- Accuracy varies across the arc, rare in the wild
Printer acting up?
We repair most makes and models.
