3D Musketeers // Technology Series
Beyond FDM: resin, powder + jetting
Six 3D printing processes, one animated schematic each. Laser machines include a live layer view where the beam traces the current cross-section. Chips show which subsystems are working. Press Focus on any section for a full-screen view.
We run FDM, SLA and MJF/SLS in-house. DMLS and PolyJet are shown for reference; ask us about metal.
SLA
laser resin / galvo mirrorsA UV laser is steered by two tiny galvo mirrors and traces each cross-section through the clear window of a resin vat, curing liquid to solid. After each layer the plate peels and lifts, fresh resin flows in, and the part grows upside down out of the tank.
- Examples
- Formlabs Form 3+, Formlabs Form 3L
- Strength
- Superb surface finish and fine detail
- Limit
- Slower per layer than MSLA; resin handling
MSLA
LCD mask / whole-layer flashNo moving beam at all: a UV LED array shines through an LCD screen that masks the light into the shape of the whole layer, curing it all at once. One part or a full plate of parts takes exactly the same time, so its layer counter finishes far ahead of the SLA machine above.
- Examples
- Elegoo Saturn 4, Anycubic Photon Mono
- Strength
- Layer time is constant - extra parts on the plate cost no extra time
- Limit
- LCD is a consumable; pixel-bound resolution
SLS
nylon powder / laser sinteringA roller spreads a fresh layer of nylon powder, then a laser sinters the cross-section into the bed. The bed drops, more powder sweeps across, and the cycle repeats. The unfused powder supports the part, so complex geometry prints with no support structures at all.
- Examples
- Formlabs Fuse 1+, EOS P 396, Sinterit Lisa
- Strength
- No supports, strong functional nylon parts
- Limit
- Powder management, cooldown takes hours
MJF
inkjet agent / fusing lampHP's take on powder: an inkjet carriage prints a fusing agent onto the powder exactly where the part should be, then an infrared lamp sweeps across and only the inked areas absorb enough heat to fuse. Two fast passes replace slow point-by-point laser scanning.
- Examples
- HP Jet Fusion 5200 / 4200 series
- Strength
- Fast, consistent, great for production runs
- Limit
- Gray parts, big-machine territory
PolyJet
material jetting / instant UV cureBasically a 2D inkjet printer that learned to stack: the carriage jets microscopic droplets of liquid photopolymer and UV lamps riding beside the heads cure them instantly. Multiple materials print in the same pass - rigid, rubbery, clear, full color - plus a gel support that washes away.
- Examples
- Stratasys J850, Objet series
- Strength
- 16 micron layers, multi-material + full color
- Limit
- Pricey materials, parts age in sunlight
DMLS / SLM
metal powder / laser meltingThe same powder-bed idea as SLS, but the fiber laser fully melts metal powder - titanium, aluminum, steel - in an argon atmosphere. Parts weld to a build plate through support lattices that anchor them against warping, then get cut off and machined.
- Examples
- EOS M 290, SLM 280, Renishaw AM 400
- Strength
- Real engineering metal, impossible geometry
- Limit
- Cost, supports, serious post-processing
